Britax |
|
|
|
Britax conducts ongoing development testing on their products. When developing a new molding tool for the Regent shell, they introduced features that improved the performance of the products made with the new tool, over those made with the older tools. The product made with the older tools did meet the requirements of FMVSS No. 213, but Britax felt that providing the components (anti-skid strips) and new installation routing instructions would help current owners achieve the same enhanced performance. The Britax Regent update kit is available for products produced from November 10, 2005 through June 18, 2007. The eligible Regent Child Restraint Systems have a model number beginning E9L39. Click here to download the Regent consumer Advisory Product Update Questions and Answers (PDF) Click here to download the Regent consumer Advisory Product Update Instructions (PDF) Click here to download the Regent consumer Advisory Product Update Letter (PDF) |
|
|
|
Decathlon
Model E9L47 made 2/12/05-7/31/07 Problem: When pulled from an extreme side angle, push button housing may separate from shell. Allowing adjuster to move out of position so harness may not tighten properly Contact: www.decathlonrecall.com or 800-683-2045 for push rivet fasteners to secure. |
|
|
|
Regent Convertible
seat model E9L3998 made 12/18/2006 – 1/18/2007 with Classic fabric Problem: Incorrect warning label on cover. Call: 1-888-427-4829 for new pad. Click here to download the Regent cover replacement letter (PDF) or Click here to download the Britax consumer inspection sheet (PDF) |
|
|
|
Boulevard Model E9L57
made 3/1/2006-8/1/2006. Problem: In crash, tether hook may break when seat is used forward facing for child over 50 lbs. If tether breaks, seat may move from upright to reclined position, increasing risk of injury. Do not use tether for child over 50 lbs. Call: 800-683-2045 for new labels to place on seat and owners manual |
|
|
|
Companion
Problem #1: All Models made pre-11/1/07. Clarification campaign to update users guide; clarify height; & inner buckle strap position. Use inner buckle position for infants under 11 lbs. Once child reaches 11 lbs move to outer position for remainder of use with that child. Child exceeds height requirement when top of head is less than 1 inch from top of seat or child’s height exceeds 30 inches. Call: 888-427-4829 for instructions & labels. Problem #2: Model E9L14 made 10/31/03-6/6/04. Tabs on bottom of carrier may not be properly seated. If not properly seated carrier may rotate too far in crash increasing risk of injury. Call: 888-427-4829 for inspection instructions. If unit is affected, use carrier only without base until replaced. |
|
|
|
Traveler Plus Model E9L32
manufactured through 7/23/2004. Problem: Adjustment strap may slip, allowing harness to loosen. Call: 800-683-2045 for new strap. Until replaced, check slippage by pulling on harness without lifting release lever. If the harness loosens do not use seat until fixed. Click here to download a PDF document on how to repair your Britax seat once the new parts are recieved |
|
|
|
Husky Model E9L30
manufactured through 7/23/2004. Problem: Adjustment strap may slip, allowing harness to loosen. Call: 800-683-2045 for new strap. Until replaced, check slippage by pulling on harness without lifting release lever. If the harness loosens do not use seat until fixed. Click here to download a PDF document on how to repair your Britax seat once the new parts are recieved |
|
|
|
Wizard Model E9L07
manufactured through 7/23/2004. Problem: Adjustment strap may slip, allowing harness to loosen. Call: 800-683-2045 for new strap. Until replaced, check slippage by pulling on harness without lifting release lever. If the harness loosens do not use seat until fixed. Click here to download a PDF document on how to repair your Britax seat once the new parts are recieved |
|
|
|
Marathon
Problem #1: Model E9L06, E9W06 & E906 made 5/23/06-7/28/06. Only seats with lot number “KGR 01 A” stamped on tether hook are affected. Tether hook may open & release, when used for a child weighing more than 50 lbs, allowing child to move too far forward. Discontinue use of tether for child over 50 lbs until replacement is installed. Note: Top tether should only be used beyond 50 lbs. if vehicle manufacturer allows tethering above this weight. Call: 800-683-2045 or visit www.marathonrecall.com for new top tether hook & “DO NOT USE” label. Problem #2: Model E9L06 made pre-7/24/04. Adjustment strap may slip & allow harness to loosen. Call: 888-427-4829 for new strap. Until replaced, check slippage by pulling on harness without lifting release lever. If harness loosens do not use seat until fixed. |
|
|
Roundabout Convertible model 161 manufactured 1/13/99-3/14/99. Problem: Harness adjuster may move in crash allowing too much forward movement Call: 800-683-2045 for shoulder pad kit. |
|
|
|
Advantage Convertible model E9022
manufactured 3/5/01-7/26/01. Problem: Tether bracket may separate from seat shell in crash. Call: 704-409-1700 option 2 for metal ring repair kit. |
|
|
|
Freeway Toddler Seat model 101
manufactured 6/96-4/18/97. Problem: Buckle can be opened by lifting up on push-button. Call: 800-683-2045 for new buckle. |
|
|
|
Super Elite
Problem #1: Model E9031 all dates. Harness adjuster may stick causing webbing to slip & harness to loosen. Call: 800-683-2045 for adjuster strap guide. Until repaired check harness is secure before use. Problem #2: manufactured 4/25/01-2/15/02. |
|
|
|
Husky
All models & manufacture dates. Problem: Use of long (serpentine) belt path w/ lap onlybelt allows too much forward head movement. Call: 888-427-4829 for new labels & instructions. |